So I’ve mentioned the birth pool before, in a previous post about stuff you might need to buy/borrow/hire/hopefully-not-steal, for birth. If you’re headed to a birth centre or hospital then you won’t need to get your own birth pool but if you’re planning a home birth then this might be something you want.
There are a few options on the market but I really rate the Birth Pool in a Box from The Good Birth Company. There are two size options – regular and mini. Both come with a liner. I used the mini last time and have gone for the same again. If you’ve not got a lot of space then the mini is perfect and plenty roomy (see photo below) but if you think you might want company in the pool then you’ll probably want to go for the regular.
Here I am enjoying the pool the other evening and feeling totally relaxed…
Once you get your birth pool, it’s recommended you do at the very least a dry run! This is for two reasons: 1. to check the pool is intact and not damaged in any way. This is highly unlikely but it would suck massively to discover in labour that you were unable to inflate it! 2. to check you have everything you need and know what you’re doing! Again you don’t want to be having to figure this out in labour or popping off to B&Q for the right tap adaptor. When I say ‘you’, I obviously mean your birth partner! This is his/her job. You will be somewhat preoccupied.
Now if you’re going to the trouble of doing a dry run, in my mind you might as well make it a wet one! For one reason it’s good to get an idea of how long it will take to fill and secondly you get the chance to enjoy your pool before the big day! Oh and thirdly you can familiarise yourself with what it feels like to be in the pool so it’s not totally alien on the day and maybe even practice some of your breathing and visualisation techniques, imagining that you are experiencing surges. I think this kind of practice beforehand is really beneficial because sometimes it’s hard to visualise being in labour before it happens – even for a third-timer! Being in the pool with the lights down low and my playlist on really helps me get in the zone and feel excited and believe this is really happening… very soon!!.
I can’t speak for all the pools out there but setting up the Birth Pool in a Box is really straightforward and doesn’t take very long at all – approximately 20 mins from opening the box to being fully inflated and ready to fill. Filling it with warm water takes longer. On our recent wet run, it took 45 mins but this will vary from house to house.
Here’s a little time-lapse video (featuring my birth partner James) that we made the other day to show you just how easy it really is to inflate…
And here’s James’ top tips (in his own words) on getting set up:
- Make sure you have all the bits you need as you unpack the box.
- Check the tap adapters for the hose! Neither of the ones that came with the pool worked with our taps so I had to take a trip to Wicks. You don’t want to be doing that when your other half is in labour. It won’t be appreciated.
- Check the hose will reach from the tap to where you are planning to have the pool.
- I really recommend getting the electric inflation pump as one, it will take a fraction of the time to inflate and two, you don’t want to be exhausted after manually inflating it. The midwife should only really be concerned with the breathing of one person.
- Inflate the pool from the bottom up, so start with the bottom level and then inflate the floor and seat after this, then move on to the middle level and then last of all the top level.
- Don’t inflate the top level all the way at first. Inflate it to about 3/4 done then put the liner in. Once the liner is in place, inflate the top level fully otherwise you will struggle to get the liner over.
- Start filling! It’s takes about 45 mins with our taps so don’t expect it to fill up quickly, it’s a big pool with a lot of capacity.
- Keep checking the water temp as it fills and adjust accordingly. It takes quite a lot of water to cool it down/warm it up, so best to monitor as it fills instead of trying to correct the temp towards the end.
IMPORTANT: If you’re doing a dry run only, then you don’t need to use the liner (keep it in its protective packaging). If you’re doing a wet run it’s recommended that you use a liner, which means you will need a second one for labour as you can only use the liner once. You can buy a new liner here.
I did not use a liner this time but we cleaned the pool with anti-bacterial spray and dried it thoroughly before packing away. We will use our liner for labour. Also we made a milton solution and circulated this through the electric submersible water pump (that you use to empty the pool) and hose for half an hour to ensure it was all clean and ready for its next use.
The electric submersible water pump comes with the standard kit. There is also a basic kit option which includes tap adaptors, the hose and a thermometer, which is cheaper. If you go for this option you will have to empty your pool with a bucket. In my opinion/experience it’s worth getting the electric water pump as it makes emptying the pool so much easier and quicker. The water just gets pumped right out, back through the same hose you used to fill the pool, and then goes down your sink/drain. The standard kit also comes with a few other extras including mats and a sieve!
You can find some more info about the pools and accessories on offer here.
If you’ve got any questions just leave me a comment below and I will be sure to reply or contact the team at The Good Birth Company.
Most importantly if you’re planning a water birth at home, ENJOY! x